VINCENT BLACK LIGHTNING - Special parts list  (Under Construction - first draft)


1. C 24/1 - Solid Ferado friction clutch plate
2. FT106/2 (left) and FT108/1 (right) -  Footrest support plates 5/16" alloy
3. F25/9AS - Special brake pedal assembly

4. FT256AS - Racing gearchange linkage and pedal (MO62)

5. G108/1 - Gearchange lever (3)
6. H7/5S - Racing front brake plate assembly, light alloy, speedo drive, anchor pins, shoe pivots, H52 air scoops, H53  Air Scoop gauze, H54 Brake cam bush, (MO45)
7. H7/6S - Racing front brake plate assembly. light alloy, plain, anchor pins, shoe pivots, H52 air scoops, H53 Air Scoop gauze, H54 Brake cam bush, (MO45)
8. H7/7S - Racing rear brake plate assembly , pins, shoe pivots, air scoops (MO46)
9. H9/1 - Brake shoe pivots (8)
10. H10/1 - Brake cam (lightened) (4)
11. H14/1 - Brake anchor pin (4)
12. H25/3AS - Front solid axel assembly (1)
13. H25/4AS - Rear solid axel assembly (1)
14. H55 - Lightning grease retainers for wheel bearings
15. F72/5 - Non-folding pressed steel footrests
16. RH side plate bolted to top of engine plate
17 Additional FT109 distance piece + smaller distance piece (?)
18. C1/1 - Lightened clutch drum, fewer disc drive ears
19. C28/2 - Clutch cover with center cooling opening
20. C3/1 - Lightened clutch carrrier assy.
21. C13/1 - Lightened clutch plate carrier
22. G3AS/2 - Clutch shaft assembly, with constant mesh pinion, and bush
23. Exhaust pipe nuts
24. Pistons
25. Polished Flywheels
26. Vibrac rods
27. 32mm inlet port heads - front
28. polished cam followers
29. Inlet and exhaust valves (forgot why I listed them..)
30. Lightning camshafts (MK 2)
31. Lightened  idler gear
32. Brake torque arm
33. front fender and braces
34. rear fender and braces
35. FT270 - Mudguard stay spacer
36. chain guard
37. G6/2, G11/3, G12/1, transmission gears
38. G32/3AS - lightened cam plate assembly with pinion
39. G21/2 (3/8") or G21/4 (1/4") - gearbox sprocket
40. H5/45 or H5/44 rear sprocket
41. H57 - Sprocket adaptor
42. H40/6 - alloy rim, WM lx2l
43. H40/7 - alloy rim, WM 2x2O)
44. 3.50x20 rear racing Avon Block pattern
45. H41/5 -  spokes 10 S.W.G. x 9 3/4" (40, for use with H40/6)
                    (note: rear alloy rim uses 8 S.W.G. x 9 1/4" spokes and 8 S.W.G. nipples)
46. H42 - Spoke nipple, 10 S.W.G. (40)
47. H56/4 - light alloy security bolt, with washer and nut for WM 1
48. H56/5 - light alloy security bolt, with washer and nut for WM 2
49. HB6/2AS - Front air slide cable assembly (1)
50. HB7/7AS - Throttle cable assembly, 32mm carb (1)
51. PR2/3 - rear chain 5/8" x 1/4", 106 pitches
52. PR9/1 - Amal jet, racing (2)
53. PR17/2 - Magneto control lever
54. PR32/1 - Rev counter gearbox
55. PR33/4 - Speedometer 180 mph, Smiths, yellow face
56. PR33/6 - Tachometer 8K, Smiths, RC115, yellow face

57. Manual magneto (lucas racing KVFTT)

58. PT1/4FAS - 2" Front exhaust pipe with narrow nut (1 7/8" exhaust pipes optional) note: original Lightning exhaust piprs were of thinner gauge material than standard models. 44" long.
59. PT1/4RAS - Rear exhaust pipe with narrow nut. 44" long.
60. T28/1 - Petrol tap, lever, larger bore than standard
61. Scalloped front fork blades (mostly Flash)
62. Gas tank with larger cut-out for 10TT9 carbs

63. 10TT9 front and rear carbs, 32mm or 1 5/32", clip mount with side float

64. Lightning seat


Comments/Additions/Corrections Please...More photos will also be added .

Return to homepage thevincent.com